-qkrbsuztps.webp){kind=small}
Crown Electric
New Construction Electrician Vancouver WA
Crown Electric is a licensed construction electrician serving Vancouver WA and Clark County. We provide complete new construction electrical services including rough-in wiring, electrical panel installation, circuit design, and final electrical for residential homes and commercial buildings — all built to the 2023 NEC code standards enforced across Washington State.
Full-Service New Construction Electrical in Clark County
From the first conduit run to the final switch plate, Crown Electric handles every phase of new construction electrical work. Our licensed electricians coordinate with your builder, pull permits through Clark County or the City of Vancouver, and deliver code-compliant installations that pass inspection the first time.
Residential New Construction Electrical
Complete electrical systems for new homes throughout Vancouver WA, including single-family houses, townhomes, ADUs, and custom builds. Every residential installation includes a properly sized electrical panel (typically 200 amp for modern homes), AFCI and GFCI protection where required by the 2023 NEC, dedicated appliance circuits, and structured wiring for today's connected households. We also rough-in for future additions like EV charger circuits and solar readiness.
View Residential Services →Commercial New Construction Electrical
Professional commercial electrical installation for offices, retail spaces, restaurants, warehouses, and light industrial facilities across Clark County. Commercial projects often require three-phase power, higher-amperage service panels, dedicated equipment circuits, commercial-grade lighting controls, fire alarm system integration, and data/communication infrastructure — all of which Crown Electric designs and installs to NEC and local code specifications.
View Commercial Services →Electrical Rough-In for New Construction
Electrical rough-in is the backbone of your building's electrical system and must be completed before insulation and drywall. Our rough-in work includes running all branch circuits, placing outlet and switch boxes per the NEC-required spacing (every 12 feet of wall and within 6 feet of doorways), installing the electrical panel, pulling wire through framing, and setting up proper grounding and bonding. Correct rough-in prevents costly tearouts and ensures your project stays on schedule.
Schedule Rough-In →Final Electrical & Inspection Coordination
Final electrical work brings your building's electrical system to life. This phase includes installing all devices (outlets, switches, dimmers), mounting light fixtures and ceiling fans, completing electrical panel labeling and finishing, circuit testing with a megohmmeter, and coordinating the final electrical inspection with Clark County or City of Vancouver inspectors. Crown Electric ensures every connection is tight, every circuit is labeled, and every system operates safely before you move in.
Schedule Final Electrical →How New Construction Electrical Works in Vancouver WA
Crown Electric follows a proven four-phase process that keeps your build on track and on budget. We coordinate with builders, architects, and inspectors throughout every stage so you never have to chase down your electrician.
Design & Load Calculation
We start with a thorough electrical load calculation per NEC Article 220 to properly size your service panel and branch circuits. This includes reviewing architectural plans, mapping outlet and fixture placement, sizing conductors for appliance circuits (kitchen, laundry, HVAC), and filing permit applications with the Clark County Permit Center or Vancouver's ePlans system.
Electrical Rough-In
After framing is complete, we install all wiring, conduit, outlet boxes, switch boxes, and the electrical panel. This work is done before insulation goes in so inspectors can verify wire sizing, box fill calculations, and proper stapling/support. We coordinate timing with your general contractor to stay ahead of insulation and drywall crews.
Rough-In Inspection
Clark County or City of Vancouver inspectors verify all rough-in work meets the 2023 NEC and Washington Cities Electrical Code. Common items checked include wire gauge for circuit amperage, AFCI/GFCI protection locations, box fill compliance, grounding electrode connections, and proper nail plate protection. Crown Electric has a strong first-pass inspection rate because we build to code from day one.
Final Electrical & Commissioning
After drywall, paint, and trim are complete, we return to install all devices and fixtures, finish the panel with proper labeling, test every circuit, and schedule the final electrical inspection. Once approved, your electrical system is certified and ready for occupancy. Crown Electric provides a comprehensive warranty on all workmanship.
New Construction Activity in Clark County
Vancouver WA and Clark County continue to see active residential and commercial development, creating strong demand for licensed construction electricians.
Vancouver issued 991 residential building permits in 2025, up from 817 the previous year, driven by developments like the Harmony View subdivision in east Vancouver's Section 30 area and ongoing mixed-use projects at The Heights District and the Waterfront Gateway. Clark County's unincorporated areas saw 772 permits — lower than recent years due to interest rate impacts and shrinking available land — but development continues in growing communities like Battle Ground, Camas, and Ridgefield.
Every one of these new builds requires a licensed electrician for electrical rough-in, panel installation, and final electrical. Crown Electric serves builders, developers, and homeowners throughout Clark County with new construction electrical services that meet the 2023 National Electrical Code (NEC) — adopted by Washington State as of April 1, 2024 — and the Washington Cities Electrical Code (WCEC). Whether your project is a single custom home in Camas or a multi-unit development in Vancouver, our team delivers on-time, code-compliant electrical work.
Residential & Commercial Electrical Specializations
Crown Electric brings specialized expertise to both residential and commercial new construction throughout Vancouver WA and Clark County. Each building type has distinct electrical requirements, and our licensed electricians have the training and experience to handle them all.
Residential New Construction
Complete electrical installation for new homes, townhomes, ADUs, and custom residential builds. Modern residential code requires far more circuits and protection than homes built even 10 years ago — including AFCI protection in all habitable rooms, tamper-resistant receptacles throughout, and dedicated circuits for major appliances.
- 200 amp electrical panel installation (load-calculated per NEC 220)
- AFCI protection for bedrooms, living rooms, and hallways
- GFCI outlets in kitchens, bathrooms, garages, and outdoor areas
- Dedicated 20A circuits for kitchen countertop receptacles
- Dedicated circuits for HVAC, water heater, dryer, and range
- Recessed lighting layout and ceiling fan pre-wire
- Structured wiring for data, phone, and smart home systems
- EV charger rough-in (240V, 50A circuit to garage)
Commercial New Construction
Professional electrical systems for offices, retail, restaurants, warehouses, and light industrial facilities. Commercial builds involve higher voltages, larger service sizes, and specialized systems that require experienced commercial electricians and often engineered electrical plans per Washington State requirements.
- Single-phase and three-phase electrical service installation
- Commercial switchgear and distribution panels
- Lighting control systems and occupancy sensors
- Emergency and exit lighting per IBC requirements
- Fire alarm system power and circuit integration
- Data closet and communication conduit infrastructure
- Equipment circuits for HVAC, kitchen, and specialty loads
- Energy code compliance (WSEC Commercial)
Washington State Electrical Code Requirements
All new construction electrical work in Clark County must meet the 2023 National Electrical Code (NEC), which Washington State adopted effective April 1, 2024. Crown Electric stays current with code changes so your project passes inspection without delays.
Arc-Fault Protection (AFCI)
The 2023 NEC requires AFCI protection on all 15A and 20A branch circuits in bedrooms, living rooms, dining rooms, hallways, closets, and other habitable rooms. AFCI breakers detect dangerous arcing conditions that can cause house fires — a critical safety feature in every new home.
Ground-Fault Protection (GFCI)
GFCI protection is required in kitchens, bathrooms, laundry areas, garages, unfinished basements, outdoor receptacles, and within 6 feet of any sink. The 2023 NEC expanded GFCI requirements to include 250V receptacles, meaning more circuits need this protection than ever before.
Tamper-Resistant Receptacles
All 15A and 20A receptacles in new residential construction must be tamper-resistant (TR). These receptacles have internal shutters that prevent children from inserting objects into the slots — a requirement since NEC 2008, now universally enforced in Clark County.
Electrical Panel Sizing
NEC Article 220 load calculations determine minimum panel sizing. Most new Vancouver WA homes require at least a 200 amp service to handle HVAC, kitchen appliances, laundry, EV charger readiness, and future additions. Crown Electric calculates your actual load rather than guessing, preventing undersized panels.
Permit & Inspection Process
Properties within Vancouver city limits require permits through the ePlans system; unincorporated Clark County properties go through the Clark County Permit Center. Crown Electric handles all permit applications and schedules inspections at each phase — rough-in, insulation, and final — so your build stays on track.
Energy Code Compliance
New construction in Washington must also meet the Washington State Energy Code (WSEC), which took effect March 14, 2024 alongside the 2021 building codes. This affects lighting requirements, controls, and efficiency standards that Crown Electric incorporates into every new construction electrical plan.
New Construction Electrical FAQ
Common questions about new construction electrical services in Vancouver WA and Clark County.
How much does new construction electrical cost in Vancouver WA?
+New construction electrical costs in Vancouver WA typically range from $3 to $8 per square foot for residential projects and $5 to $12 per square foot for commercial builds. For a typical 2,000 sq ft home, expect roughly $6,000–$16,000 for complete electrical, depending on panel amperage, number of circuits, lighting complexity, and any specialty wiring (EV charger, home automation, etc.). A 200 amp panel installation alone averages $1,800–$4,500. Crown Electric provides detailed, transparent estimates with no hidden fees.
What electrical permits are required for new construction in Clark County?
+New construction requires electrical permits from either the City of Vancouver (submitted through the ePlans system) or the Clark County Permit Center, depending on which jurisdiction your property falls in. Required inspections include electrical rough-in, insulation check, and final electrical inspection. All work must comply with the 2023 National Electrical Code (NEC), which Washington State adopted effective April 1, 2024. Crown Electric handles all permit applications, fee payments, and inspection scheduling as part of our service.
How long does new construction electrical installation take?
+Residential electrical rough-in typically takes 2–5 days depending on home size and complexity, with final electrical requiring 1–3 days. Commercial new construction electrical may take 2–8 weeks depending on building size and three-phase requirements. These timelines exclude the inspection wait period, which varies by jurisdiction. Crown Electric coordinates closely with your general contractor to ensure electrical work aligns with the overall construction schedule.
What size electrical panel do I need for new construction?
+Most new homes in Vancouver WA require a minimum 200 amp electrical panel. This provides adequate capacity for modern demands including central HVAC, electric water heater, kitchen appliances, laundry, and an EV charger circuit. Larger homes over 3,000 sq ft — or those with workshops, hot tubs, pool equipment, or multiple EV chargers — may need a 400 amp service or a subpanel installation. Crown Electric performs a detailed NEC Article 220 load calculation for every project to determine the right panel size — never guessing or undersizing.
Does Crown Electric coordinate with builders and general contractors?
+Absolutely. Coordinating with the general contractor and other trades is essential for keeping a construction project on schedule. We time our rough-in to happen after framing and before insulation, schedule inspections promptly to avoid holding up drywall, and return for final electrical at the right point in the finish schedule. We communicate directly with your builder on timelines and any changes, and we're experienced with the workflows of many local Clark County builders and developers.
What electrical code applies to new construction in Clark County?
+New construction in Clark County must comply with the 2023 National Electrical Code (NEC/NFPA 70), which Washington State's Department of Labor & Industries adopted effective April 1, 2024. The City of Vancouver also follows the Washington Cities Electrical Code (WCEC). Key requirements for new residential construction include AFCI protection in all habitable rooms, GFCI protection in wet locations and garages, tamper-resistant receptacles throughout, minimum 200 amp service panels for most homes, and compliance with the Washington State Energy Code (WSEC). Crown Electric's licensed electricians stay current with every code update.
Ready to Start Your New Construction Electrical Project?
Contact Crown Electric for a free estimate on new construction electrical services in Vancouver WA and Clark County. Licensed electricians, code-compliant work, and no-hassle project coordination with your builder.